KT-H100 Two Post Vehicle Lift 10,000lbs

Description

KT-H100 10000lbs vehicle lift

*Concrete thickness must be at least 5.9” (150 MM) with a 3000 PSI rating. Failure to install this lift on the proper concrete, could result in serious injury or death! It is the customer’s responsibility to verify concrete thickness and strength before purchase and installation.

10000lbs lifting capacity

CE Approved and Certified. It has adopted the 115% dynamic loading capacity standard and was 150% static loading capacity tested.

Manual safety release from two sides

Symmetric arm

Base plate design

Dual Hydraulic Chain-Drive Cylinders

Rubber pad door opening protection

Comes with extension support adaptor sets of +30mm and +120mm

Feet-protection safety guardrails with tools box

Top-level hydraulic system with 220V/60HZ/1PH and 110V/60HZ/1PH (Optional)

Lifting Capacity	10000lbs/4500KG
Max. Lifting Height	70.75″/1800mm
Min. Height	4.25″/110mm
Height Overall	110.25″/2800mm
Width Overall	142.25″/3614mm
Outside Column	128″/3250mm
Inside Column	110.25″/2800mm
Dirve-Thru Clearance	94.5″/2400mm
Front Arm Reach (Min)	30.75″/780mm (2 stages)
Front Arm Reach (Max)	50.5″/1280mm (2 stages)
Rear Arm Reach (Min)	30.75″/780mm (2 stages)
Rear Arm Reach (Max)	50.5″/1280mm (2 stages)
Motor	220VAC/60HZ/1PH/2.2KW
Net Weight	1256lbs/570KG

SHIPPING POLICY: Please read carefully

Freight shipping ONLY within the lower 48 states.
Shipping carrier may charge extra to residential Delivery.
THE BUYER IS RESPONSIBLE FOR UNLOADING FROM THE TRUCK.
Customer should consider Forklift and unloading dock service.
The buyer should be also responsible for any re-delivery charges.
Buyers should inspect delivered the products carefully before signing Bill of Lading or Delivery Receipt at the time of delivery. Buyer satisfaction is assumed if no damages are noted on the delivery receipt.